Re: Failed to access the USB through python.
According to the output of lsusb, maybe i have to add the card-reader's driver package? The ACR122U card reader driver package need the pcsc-lite and libusb to be successfully compiled. Any suggestions?
View ArticleHow do I capture mouse events on Galileo Gen 2?
I've been trying to capture and log mouse events with the MouseController library, but failed miserably. Is there another library that can be used to listen on the USB Host on the Galileo Gen 2? Thanks!
View ArticleRe: Suitable SD voltage level translators?
faceplant - that link does not seem to work. As far as I can tell, the TXB0108 is not well suited to SD card level translation. SD cards have an internal 10K to 100K pullup on the DAT3 pin, and...
View ArticleRe: D54250WYKH NUC Power button do not light up.
Joe, I had shorted the red pins, but it did not have any effect. The power button still do not turn on. Is there anything else I could try?Regards,Rajesh
View ArticleRe: D54250WYKH NUC Power button do not light up.
I am experiencing the same issue with the same device. I have contacted support via a ticket for a replacement as the product is under warranty. I too cannot get any power whatsoever, even after...
View ArticleIntel HD 4600 display issue
Machine information: Laptop MSI G70 PE2 Dominator ProOS Win 8.1 64-bitDriver version 15.36.3.64.3907(Latest)Graphic card GTX 880M with integrated HD 4600 using Nvidia OptimusIntegrated monitor CMO1720...
View Articlesys_reset# use with Intel® 5 Series HM55 chipset and an embedded COM Express™...
Hello. We are using an embedded COM Express™ Intel® Core™ i7 Celeron processor with an Intel® 5 Series HM55 chipset by Congatec, model conga-BM57. We have on our carrier also an Altera™ Startix IV...
View ArticleRe: Intel AC7260 limited access after sleep
<<The simple fact is I have tried every Microsoft, Lenovo, and Intel driver. Also just noting to those with Lenovo products you have yet an entirely separate issue.>> I'm now wondering...
View ArticleRe: Where do I put arduino sketch on SD card?
Depends on the image you have on the SD card whether it's supported or not.If supported the Arduino IDE should upload the sketch to the /sketch folder and rename the binary to sketch.elf
View ArticleRe: Building Linux image for Galileo Gen 2 in Ubuntu 14.04
as long as the image is created I wouldn't worry too much
View ArticleRe: Cannot Acecss Galelio LINUX OS
more important than cable colors are what they are connected to. You should measure with a multimeter the connections.LAN cable works fine if you use e.g. the IoT devkit image on...
View ArticleRe: Where do I put arduino sketch on SD card?
The image I'm using is the one found here (https://software.intel.com/en-us/iot/downloads) which is the Linux image with IoTkit + LighttPD. So are you saying that if I power up my galileo, booting from...
View ArticleRe: Where do I put arduino sketch on SD card?
yes - it will save one sketch. If you put another sketch there it obviously will overwrite the former one but will keep 1 old sketch as sketch.elf.old
View ArticleStuck on acceptance of site use terms
I am trying to view a page on the intel website, however it comes up with: Intel® Developer Zone Additional TermsAcceptance of Site Use Terms...Every time I click "continue" at the bottom of the page,...
View ArticleRe: Intel HD 4000 Screen brightness problem
Hi Sowmya, The laptop is working fine now. I installed a lot of small updates from Windows Update and it seems like that did the trick. Can't believe I didn't check that option before i complained ....
View ArticleRe: Edison Breakout Board
Should mention I already updated the image and configured wifi, etc. I assumed that it would work the same way as the Arduino adapter, i.e. with two USB cables. But I second BIOSDude that some...
View ArticleRe: HowTo: connect USB camera and...
Above picture is very helpful! I just complained elsewhere that there's no picture in the breakout board docs about where or how to actually hook up an external power supply.
View ArticleRe: why Intel® Quark SoC X1000 chip get hot fast once it powered?
intel galileo board. hmm, temp? when touched the chip, it just get hot fast ya
View ArticleRe: DN2820FYKH wake from S5 with remote
By manually you mean the timer settings for S5 in the BIOS right?But that has nothing to do with remote wake up. My Problem is that i use OpenELEC on my NUC and it would be nice if i can turn on my NUC...
View ArticleRe: Galileo BSP1.0.2 build instructions
The Quark SoC BSP build guide version 1.0.2 is (a bit hidden) here: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23962&lang=enghttps://www.google.com/webhp?q=edkii+update+quark It has...
View Article
More Pages to Explore .....